Postman Collection

Devices

get

Get a collection of Devices. A Device is either a DevicePhone or a DeviceServer.

Header parameters
Cache-ControlstringOptional

The standard HTTP Cache-Control header is required for all signed requests.

User-AgentstringRequired

The User-Agent header field should contain information about the user agent originating the request. There are no restrictions on the value of this header.

X-Bunq-LanguagestringOptional

The X-Bunq-Language header must contain a preferred language indication. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore. Currently only the languages en_US and nl_NL are supported. Anything else will default to en_US.

X-Bunq-RegionstringOptional

The X-Bunq-Region header must contain the region (country) of the client device. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore.

X-Bunq-Client-Request-IdstringOptional

This header must specify an ID with each request that is unique for the logged in user. There are no restrictions for the format of this ID. However, the server will respond with an error when the same ID is used again on the same DeviceServer.

X-Bunq-GeolocationstringOptional

This header must specify the geolocation of the device. The format of this value is longitude latitude altitude radius country. The country is expected to be formatted of an ISO 3166-1 alpha-2 country code. When no geolocation is available or known the header must still be included but can be zero valued.

X-Bunq-Client-AuthenticationstringRequired

The authentication token is used to authenticate the source of the API call. It is required by all API calls except for POST /v1/installation. It is important to note that the device and session calls are using the token from the response of the installation call, while all the other calls use the token from the response of the session-server call

Responses
200
Used to get a Device or a listing of Devices. Creating a DeviceServer should happen via /device-server
application/json
get
GET /v1/device HTTP/1.1
Host: public-api.sandbox.bunq.com
User-Agent: text
X-Bunq-Client-Authentication: text
Accept: */*

[
  {
    "DeviceServer": {
      "description": "text"
    }
  }
]
get

Get a single Device. A Device is either a DevicePhone or a DeviceServer.

Path parameters
itemIdintegerRequired
Header parameters
Cache-ControlstringOptional

The standard HTTP Cache-Control header is required for all signed requests.

User-AgentstringRequired

The User-Agent header field should contain information about the user agent originating the request. There are no restrictions on the value of this header.

X-Bunq-LanguagestringOptional

The X-Bunq-Language header must contain a preferred language indication. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore. Currently only the languages en_US and nl_NL are supported. Anything else will default to en_US.

X-Bunq-RegionstringOptional

The X-Bunq-Region header must contain the region (country) of the client device. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore.

X-Bunq-Client-Request-IdstringOptional

This header must specify an ID with each request that is unique for the logged in user. There are no restrictions for the format of this ID. However, the server will respond with an error when the same ID is used again on the same DeviceServer.

X-Bunq-GeolocationstringOptional

This header must specify the geolocation of the device. The format of this value is longitude latitude altitude radius country. The country is expected to be formatted of an ISO 3166-1 alpha-2 country code. When no geolocation is available or known the header must still be included but can be zero valued.

X-Bunq-Client-AuthenticationstringRequired

The authentication token is used to authenticate the source of the API call. It is required by all API calls except for POST /v1/installation. It is important to note that the device and session calls are using the token from the response of the installation call, while all the other calls use the token from the response of the session-server call

Responses
200
Used to get a Device or a listing of Devices. Creating a DeviceServer should happen via /device-server
application/json
get
GET /v1/device/{itemId} HTTP/1.1
Host: public-api.sandbox.bunq.com
User-Agent: text
X-Bunq-Client-Authentication: text
Accept: */*

{
  "DeviceServer": {
    "description": "text"
  }
}
get

Get one of your DeviceServers.

Path parameters
itemIdintegerRequired
Header parameters
Cache-ControlstringOptional

The standard HTTP Cache-Control header is required for all signed requests.

User-AgentstringRequired

The User-Agent header field should contain information about the user agent originating the request. There are no restrictions on the value of this header.

X-Bunq-LanguagestringOptional

The X-Bunq-Language header must contain a preferred language indication. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore. Currently only the languages en_US and nl_NL are supported. Anything else will default to en_US.

X-Bunq-RegionstringOptional

The X-Bunq-Region header must contain the region (country) of the client device. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore.

X-Bunq-Client-Request-IdstringOptional

This header must specify an ID with each request that is unique for the logged in user. There are no restrictions for the format of this ID. However, the server will respond with an error when the same ID is used again on the same DeviceServer.

X-Bunq-GeolocationstringOptional

This header must specify the geolocation of the device. The format of this value is longitude latitude altitude radius country. The country is expected to be formatted of an ISO 3166-1 alpha-2 country code. When no geolocation is available or known the header must still be included but can be zero valued.

X-Bunq-Client-AuthenticationstringRequired

The authentication token is used to authenticate the source of the API call. It is required by all API calls except for POST /v1/installation. It is important to note that the device and session calls are using the token from the response of the installation call, while all the other calls use the token from the response of the session-server call

Responses
200
After having created an Installation you can now create a DeviceServer. A DeviceServer is needed to do a login call with session-server.
application/json
get
GET /v1/device-server/{itemId} HTTP/1.1
Host: public-api.sandbox.bunq.com
User-Agent: text
X-Bunq-Client-Authentication: text
Accept: */*

{
  "id": 1,
  "created": "text",
  "updated": "text",
  "description": "text",
  "ip": "text",
  "status": "text"
}
get

Get a collection of all the DeviceServers you have created.

Header parameters
Cache-ControlstringOptional

The standard HTTP Cache-Control header is required for all signed requests.

User-AgentstringRequired

The User-Agent header field should contain information about the user agent originating the request. There are no restrictions on the value of this header.

X-Bunq-LanguagestringOptional

The X-Bunq-Language header must contain a preferred language indication. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore. Currently only the languages en_US and nl_NL are supported. Anything else will default to en_US.

X-Bunq-RegionstringOptional

The X-Bunq-Region header must contain the region (country) of the client device. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore.

X-Bunq-Client-Request-IdstringOptional

This header must specify an ID with each request that is unique for the logged in user. There are no restrictions for the format of this ID. However, the server will respond with an error when the same ID is used again on the same DeviceServer.

X-Bunq-GeolocationstringOptional

This header must specify the geolocation of the device. The format of this value is longitude latitude altitude radius country. The country is expected to be formatted of an ISO 3166-1 alpha-2 country code. When no geolocation is available or known the header must still be included but can be zero valued.

X-Bunq-Client-AuthenticationstringRequired

The authentication token is used to authenticate the source of the API call. It is required by all API calls except for POST /v1/installation. It is important to note that the device and session calls are using the token from the response of the installation call, while all the other calls use the token from the response of the session-server call

Responses
200
After having created an Installation you can now create a DeviceServer. A DeviceServer is needed to do a login call with session-server.
application/json
get
GET /v1/device-server HTTP/1.1
Host: public-api.sandbox.bunq.com
User-Agent: text
X-Bunq-Client-Authentication: text
Accept: */*

[
  {
    "id": 1,
    "created": "text",
    "updated": "text",
    "description": "text",
    "ip": "text",
    "status": "text"
  }
]
post

Create a new DeviceServer providing the installation token in the header and signing the request with the private part of the key you used to create the installation. The API Key that you are using will be bound to the IP address of the DeviceServer which you have created.Using a Wildcard API Key gives you the freedom to make API calls even if the IP address has changed after the POST device-server.Find out more at this link https:/bunq.com/en/apikey-dynamic-ip.

Header parameters
Cache-ControlstringOptional

The standard HTTP Cache-Control header is required for all signed requests.

User-AgentstringRequired

The User-Agent header field should contain information about the user agent originating the request. There are no restrictions on the value of this header.

X-Bunq-LanguagestringOptional

The X-Bunq-Language header must contain a preferred language indication. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore. Currently only the languages en_US and nl_NL are supported. Anything else will default to en_US.

X-Bunq-RegionstringOptional

The X-Bunq-Region header must contain the region (country) of the client device. The value of this header is formatted as a ISO 639-1 language code plus a ISO 3166-1 alpha-2 country code, separated by an underscore.

X-Bunq-Client-Request-IdstringOptional

This header must specify an ID with each request that is unique for the logged in user. There are no restrictions for the format of this ID. However, the server will respond with an error when the same ID is used again on the same DeviceServer.

X-Bunq-GeolocationstringOptional

This header must specify the geolocation of the device. The format of this value is longitude latitude altitude radius country. The country is expected to be formatted of an ISO 3166-1 alpha-2 country code. When no geolocation is available or known the header must still be included but can be zero valued.

X-Bunq-Client-AuthenticationstringRequired

The authentication token is used to authenticate the source of the API call. It is required by all API calls except for POST /v1/installation. It is important to note that the device and session calls are using the token from the response of the installation call, while all the other calls use the token from the response of the session-server call

Body
descriptionstringRequired

The description of the DeviceServer. This is only for your own reference when reading the DeviceServer again.

secretstringWrite-onlyRequired

The API key. You can request an API key in the bunq app.

permitted_ipsstring[]Write-onlyOptional

An array of IPs (v4 or v6) this DeviceServer will be able to do calls from. These will be linked to the API key.

Responses
200
After having created an Installation you can now create a DeviceServer. A DeviceServer is needed to do a login call with session-server.
application/json
post
POST /v1/device-server HTTP/1.1
Host: public-api.sandbox.bunq.com
User-Agent: text
X-Bunq-Client-Authentication: text
Content-Type: application/json
Accept: */*
Content-Length: 63

{
  "description": "text",
  "secret": "text",
  "permitted_ips": [
    "text"
  ]
}
{
  "id": 1
}

PreviousCustomer StatementsNextDraft Payment

Last updated

Was this helpful?